
Dolomit16x193
The extra wide deck board
with a vivid interplay of colours and wood character
// Surface: Structured with colour gradient and polished
// Can be laid on one side
// Gap width: 5 mm (± 0.5 mm)
// Colour-resistant
// Free from dangerous splinters
// Solid and completely coloured
// Sustainable
// High surface hardness
// Color: Brown, Grey, Sandy Brown and Green Black
// Material: GCC HOLZart

Glacier16x193
The extra wide deck board with wooden
character or finely corrugated design
// Surface: Finely corrugated or structured
// Can be laid on both sides
// Gap width: 8 mm (± 0.5 mm)
// Colour-resistant
// Free from dangerous splinters
// Solid and completely coloured
// Sustainable
// High surface hardness
// Color:Terra and Graphite
// Material: GCC HOLZart

Trend16x163
The wide deck board in grooved or finely corrugated design
// Surface: Finely corrugated or grooved
// Can be laid on both sides
// Gap width: 8 mm (± 0.5 mm)
// Colour-resistant
// Free from dangerous splinters
// Solid and completely coloured
// Sustainable
// High surface hardness
// Color: Terra and Graphite
// Material: GCC HOLZart

Trend19x130
The narrow deck board in grooved or finely corrugated design.
// Surface: Finely corrugated or grooved
// Can be laid on both sides
// Gap width: 8 mm (± 0.5 mm)
// Colour-resistant
// Free from dangerous splinters
// Solid and completely coloured
// Sustainable
// High surface hardness
// Color: Graphite and Terra
// Material: GCC HOLZart

Relief R2416x145
The robust board with a special structure.
// Surface: droved and matted
// Can be laid on one side
// Gap width: 5 mm (± 0.5 mm)
// Colour-resistant
// Free from dangerous splinters
// Solid and completely coloured
// Sustainable
// Extremely high surface hardness
// Color: Fokus Chocolate Black and Platin
// Material: GCC HARZart

Dolomit19x145
The classic deck board with natural colour gradient and sealed surface
// Surface: waved with colour gradient and matted
// Can be laid on one side
// Gap width: 5 mm (± 0.5 mm)
// Colour-resistant
// Free from dangerous splinters
// Solid and completely coloured
// Sustainable
// Extremely high surface hardness
// Color: Fokus Brown and Fokus Grey
// Material: GCC HARZart


Light System
The dimmable LED spots in a pleasant warm light tone
// 24 Volt DC IP67
// Easy to assemble
// Dimmable via remote control
// Can be greatly expanded for radio control
// Can be individually controlled
// Scope of use: Private and commercial
// Material: Stainless steel spots
ITEM OVERVIEW
LED mini spot Ø 34 mm (0.25 W) 10 lumen

LED maxi spot Ø 60 mm (0.50 W) 28 lumen

Radio control with remote control

40 W power supply

2-way distributor

4-way distributor

1/3/6 m extension

Simple terrace maintenance
Tips for the right terrace care
Your EasyDeck® terrace is not only a place where you feel comfortable, it is also easy to maintain. Stains do not come from the material itself, but from environmental influences such as dust, pollen or water stains - often at the transition between roofing and open space. Even stains caused by normal use usually remain superficial. They can be easily removed with water and a scrubbing brush. Sun and rain often cause residues to fade. Additional cleaning agents are rarely necessary – this makes the maintenance particularly environmentally friendly.
Clean as follows:
- 1. Sweep dry, loose dirt from the decking.
2. Sufficiently water the entire terrace deck and keep moist for at least 15 minutes.
3. Clean the decking with water and a standard scrubbing brush or root brush. If a deeper clean is required, please also use a surface cleaner with a rotating brush.
4. Thoroughly rinse the decking with clean tap water. Wipe with a rubber squeegee and allow to dry.
Simply real natural fibres

Simply clean with water

Simply wait

Powerful cleaning
Many stains will fade away over time due to sun and rain. For more stubborn stains on planks made of GCC HOLZart and GCC HARZart, it is best to use our special, highly concentrated liquid cleaner GCC Pure Wash. The phosphate-free cleaner is based on renewable raw materials and is fully biodegradable.
Cleaning with liquid cleaner- 1. Mix the cleaning solution by diluting 1 part GCC Pure Wash with 2 parts clear water. 50–70 ml/m2 of the finished solution is sufficient for one cleaning cycle.
2. Distribute the cleaning solution evenly over the pre-cleaned and pre-rinsed deck. We recommend using a pressure spray bottle for even application.
3. Work the cleaning solution into the floor with a standard scrubbing brush or root brush and leave to take effect for at least 3 minutes. The formation of foam increases the cleaning effect.
4. Then thoroughly rinse with plenty of clear water and remove with a rubber squeegee.
5. Repeat the application if necessary.

For very stubborn stains on planks made of GCC HOLZart (e.g. Glacier, Trend or Dolomit16x193), you can also use our scouring powder with the GCC scrubbing brush (corundum scrubbing brush). It is free of surfactants and other chemicals, so there is no risk of groundwater contamination. 2 kg scouring powder is enough for an area of approx. 20 m2.
For this, distribute the powder evenly on the deck that has been pre-cleaned and pre-wetted with GCC Pure Wash. Work in and scrub off with clear water and a GCC scrubber from EasyDeck® (corundum scrubber). Then thoroughly rinse with water and strip with a squeegee. Repeat the application if necessary. Do not treat sensitive surfaces or mask them beforehand.The safety datasheet and the list of ingredients is provided at:
www.novo-tech.de/service
Do not use scouring powder or GCC/corundum scrubbers on GCC HARZart decking boards with an embossed or matted surface!

Board overview
